The widespread use of solar-reflective roofing materials can save energy, mitigate urban heat islands and slow global warming by cooling the roughly 20% of the urban surface that is roofed. In this study we created prototype solar-reflective nonwhite concrete tile and asphalt shingle roofing materials using a two-layer spray coating process intended to maximize both solar reflectance and factory-line throughput. Each layer is a thin, quick-drying, pigmented latex paint based on either acrylic or a poly(vinylidene fluoride)/acrylic blend. The first layer is a titanium dioxide rutile white basecoat that increases the solar reflectance of a gray-cement concrete tile from 0.18 to 0.79, and that of a shingle surfaced with bare granules from 0.06 to 0.62. The second layer is a “cool” color topcoat with weak near-infrared (NIR) absorption and/or strong NIR backscattering. Each layer dries within seconds, potentially allowing a factory line to pass first under the white spray, then under the color spray.
We combined a white basecoat with monocolor topcoats in various shades of red, brown, green and blue to prepare 24 cool colored prototype tiles and 24 cool colored prototypes shingles. The solar reflectances of the tiles ranged from 0.26 (dark brown; CIELAB lightness value L*=29) to 0.57 (light green; L*=76); those of the shingles ranged from 0.18 (dark brown; L*=26) to 0.34 (light green; L*=68). Over half of the tiles had a solar reflectance of at least 0.40, and over half of the shingles had a solar reflectance of at least 0.25.
Levinson R, Akbari H, Berdahl P, Wood K, Skilton W, Petersheim J. “A novel technique for the production of cool colored concrete tile and asphalt shingle roofing products.” Solar Energy Materials and Solar Cells. 2010;94:946-954.
Hashem Akbari (Lawrence Berkeley National Lab (LBNL))
Paul Berdahl (Lawrence Berkeley National Lab (LBNL))
K. Wood
W. Skilton
J. Petersheim
Source: Solar Energy Materials and Solar Cells
Publication Date: March 2010